NAME

CN-2-2-3 - Receiving CoTI - Invalid Mobility Header Len

TARGET

Host

TOPOLOGY

       HA----------R2----------R1----------R0
       |           |           |           |
       |           |           |           |
       |----       |----       |----MN     |----CN(NUT)
       |           |           |           |
       |           |           |           |
   Home Link     Link2       Link1       Link0
               (Foreign)   (Foreign)

Link0	3ffe:501:ffff:100::/64
Link1	3ffe:501:ffff:101::/64	Foreign Link
Link2	3ffe:501:ffff:102::/64	Foreign Link 2
Home Link	3ffe:501:ffff:104::/64	Home Link
CN(NUT)	3ffe:501:ffff:100::X Auto Configuration (InterfaceID)
MN(in Link1)	3ffe:501:ffff:101::Y Increased in each test (InterfaceID)	MN care-of address
MN(in Home Link)	3ffe:501:ffff:104::Y Increased in each test (InterfaceID)	MN home address
R0(Link0)	3ffe:501:ffff:100::1
R1(Link1)	3ffe:501:ffff:101::1
R2(Link2)	3ffe:501:ffff:102::1
HA(Home Link)	3ffe:501:ffff:104::1

INITIALIZATION

Reboot NUT (reboot.rmt)

TEST PROCEDURE

       MN      R1      HA      R0     CN(NUT) 
        |       |       |       |       |
        |       |       |       |------>| 1.RA
        |       |       |       |       |
        |       |       |       |------>| 2.NS
        |       |       |       |       |
        |       |       |       |<------| 3.NA
        |       |       |       |       |
        |-------------->|-------------->| 4.Echo Request
        |       |       |       |       |
        |<--------------|<--------------| 5.Echo Reply
        |       |       |       |       |
        |------------------------------>| 6.Echo Request(Home Address option)
        |       |       |       |       |
        |<------------------------------| 7.BE(Status=1)
        |       |       |       |       |
        |------------------------------>| 8.CoTI(Mobility Header Len=0)
        |       |       |       |       |
        |<------------------------------| 9.ICMP Parameter Problem(Code 0) (*1)
        |       |       |       |       |

1. Send Router Advertisement.
2. Send Neighbor Solicitation.
3. Receive Neighbor Advertisement.
4. Send ICMP Echo Request.
5. Receive ICMP Echo Reply.
6. Send ICMP Echo Request(Home Address option).
7. Receive Binding Error(Status=1).
8. Send Care-of Test Init(Mobility Header Len=0).
9. Receive ICMP Parameter Problem(Code 0).

Packet Format
8. Care-of Test Init
9. ICMP Parameter Problem(Code 0)

JUDGEMENT

(*1) MN receives ICMP Parameter Problem (Code 0).
  - The Pointer field is set to 41.

REFERENCE

(draft-ietf-mobileip-ipv6-24.txt)

9.2 Processing Mobility Headers

   Mobility Header processing MUST observe the following rules:

     (snip)

   o  The Header Len field in the Mobility Header MUST NOT be less than
      the length specified for this particular type of message in
      Section 6.1.  Otherwise, the node MUST discard the message and
      SHOULD send ICMP Parameter Problem, Code 0, directly to the Source
      Address of the packet as specified in RFC 2463 [14].  (The Binding
      Cache information is again not used.) The Pointer field in the
      ICMP message SHOULD point at the Header Len field.

6.1.4 Care-of Test Init Message

   If no actual options are present in this message, no padding is
   necessary and the Header Len field will be set to 1.