CN-2-3-4 - Receiving BU - Invalid Mobility Header Reserved
Host
HA----------R2----------R1----------R0
| | | |
| | | |
|---- |---- |----MN |----CN(NUT)
| | | |
| | | |
Home Link Link2 Link1 Link0
(Foreign) (Foreign)
Link0 3ffe:501:ffff:100::/64 Link1 3ffe:501:ffff:101::/64 Foreign Link Link2 3ffe:501:ffff:102::/64 Foreign Link 2 Home Link 3ffe:501:ffff:104::/64 Home Link CN(NUT) 3ffe:501:ffff:100::X
Auto Configuration (InterfaceID)MN(in Link1) 3ffe:501:ffff:101::Y
Increased in each test (InterfaceID)MN care-of address MN(in Home Link) 3ffe:501:ffff:104::Y
Increased in each test (InterfaceID)MN home address R0(Link0) 3ffe:501:ffff:100::1 R1(Link1) 3ffe:501:ffff:101::1 R2(Link2) 3ffe:501:ffff:102::1 HA(Home Link) 3ffe:501:ffff:104::1
Reboot NUT (reboot.rmt)
MN R1 HA R0 CN(NUT)
| | | | |
| | | |------>| 1.RA
| | | | |
| | | |------>| 2.NS
| | | | |
| | | |<------| 3.NA
| | | | |
|-------------->|-------------->| 4.Echo Request
| | | | |
|<--------------|<--------------| 5.Echo Reply
| | | | |
|------------------------------>| 6.Echo Request(Home Address option)
| | | | |
|<------------------------------| 7.BE(Status=1)
| | | | |
|------------------------------>| 8.CoTI
| | | | |
|-------------->|-------------->| 9.HoTI
| | | | |
|<------------------------------| 10.CoT
| | | | |
|<--------------|<--------------| 11.HoT
| | | | |
|------------------------------>| 12.BU(Reserved after MH Type = 0xff)
| | | | |
|<------------------------------| 13.BA(Status=0) (*1)
| | | | |
|------------------------------>| 14.Echo Request(Home Address option)
| | | | |
|<------------------------------| 15.Echo Reply(Type2 Routing Header) (*2)
| | | | |
1. Send Router Advertisement. 2. Send Neighbor Solicitation. 3. Receive Neighbor Advertisement. 4. Send ICMP Echo Request. 5. Receive ICMP Echo Reply. 6. Send ICMP Echo Request(Home Address option). 7. Receive Binding Error(Status=1). 8. Send Care-of Test Init 9. Send Home Test Init 10. Receive Care-of Test. 11. Receive Home Test. 12. Send Binding Update(Reserved after MH Type = 0xff). 13. Receive Binding Acknowledgement(Status=0). 14. Send ICMP Echo Request(Home Address option). 15. Receive ICMP Echo Reply(Type2 Routing Header).
Packet Format 12. Binding Update 13. Binding Acknowledgement 14. ICMP_Echo Request(Home Address option) 15. ICMP Echo Reply(Type2 Routing Header)
(*1) MN receives Binding Acknowledgement. - The Destination Address is set to the Source Address of the Binding Update (MN care-of address). - The Status field is set to 0.
(*2) MN receives ICMP Echo Reply. (Binding Cache entry is created.) - The Destination Address is set to the Source Address of the Binding Update (MN care-of address). - Type 2 Routing Header is included.
(draft-ietf-mobileip-ipv6-24.txt)
6.1.7 Binding Update Message
Reserved
These fields are unused. They MUST be initialized to zero by the
sender and MUST be ignored by the receiver.