NAME

CN-2-5-2 - Receiving BU with (A)bit is cleared - Invalid Sequence #

TARGET

Host

TOPOLOGY

       HA----------R2----------R1----------R0
       |           |           |           |
       |           |           |           |
       |----       |----       |----MN     |----CN(NUT)
       |           |           |           |
       |           |           |           |
   Home Link     Link2       Link1       Link0
               (Foreign)   (Foreign)

Link0	3ffe:501:ffff:100::/64
Link1	3ffe:501:ffff:101::/64	Foreign Link
Link2	3ffe:501:ffff:102::/64	Foreign Link 2
Home Link	3ffe:501:ffff:104::/64	Home Link
CN(NUT)	3ffe:501:ffff:100::X Auto Configuration (InterfaceID)
MN(in Link1)	3ffe:501:ffff:101::Y Increased in each test (InterfaceID)	MN care-of address
MN(in Home Link)	3ffe:501:ffff:104::Y Increased in each test (InterfaceID)	MN home address
R0(Link0)	3ffe:501:ffff:100::1
R1(Link1)	3ffe:501:ffff:101::1
R2(Link2)	3ffe:501:ffff:102::1
HA(Home Link)	3ffe:501:ffff:104::1

INITIALIZATION

Reboot NUT (reboot.rmt)

TEST PROCEDURE

       MN      R1      HA      R0     CN(NUT) 
        |       |       |       |       |
        |       |       |       |------>| 1.RA
        |       |       |       |       |
        |       |       |       |------>| 2.NS
        |       |       |       |       |
        |       |       |       |<------| 3.NA
        |       |       |       |       |
        |-------------->|-------------->| 4.Echo Request
        |       |       |       |       |
        |<--------------|<--------------| 5.Echo Reply
        |       |       |       |       |
        |------------------------------>| 6.Echo Request(Home Address option)
        |       |       |       |       |
        |<------------------------------| 7.BE(Status=1)
        |       |       |       |       |
        |------------------------------>| 8.CoTI
        |       |       |       |       |
        |-------------->|-------------->| 9.HoTI
        |       |       |       |       |
        |<------------------------------| 10.CoT
        |       |       |       |       |
        |<--------------|<--------------| 11.HoT
        |       |       |       |       |
        |------------------------------>| 12.BU((A)bit=ON,Sequence No=10000)
        |       |       |       |       |
        |<------------------------------| 13.BA(Status=0)
        |       |       |       |       |
        |------------------------------>| 14.BU((A)bit=OFF,Sequence No=10000)
        |       |       |       |       |
        |<------------------------------| 15.BA(Status=135) (*1)
        |       |       |       |       |

1. Send Router Advertisement.
2. Send Neighbor Solicitation.
3. Receive Neighbor Advertisement.
4. Send ICMP Echo Request.
5. Receive ICMP Echo Reply.
6. Send ICMP Echo Request(Home Address option).
7. Receive Binding Error(Status=1).
8. Send Care-of Test Init.
9. Send Home Test Init.
10. Receive Care-of Test.
11. Receive Home Test.
12. Send Binding Update(A bit=ON,Sequence No=10000).
13. Receive Binding Acknowledgement(Status=0).
14. Send Binding Update(A bit=OFF,Sequence No=10000).
15. Receive Binding Acknowledgement(Status=135).

Packet Format
14. Binding Update
15. Binding Acknowledgement

JUDGEMENT

(*1) MN receives Binding Acknowledgement.
  - The Destination Address is set to the Source Address of the Binding Update (MN care-of address).
  - The Status field is set to 135.
  - Binding Authorization Data option is included.
  - Authenticator field of Binding Authorization Data option has the valid value.
  - Type 2 Routing Header is included.
  - The Home Address field of Type 2 Routing Header is set to MN home address.

REFERENCE

(draft-ietf-mobileip-ipv6-24.txt)

9.5.4 Sending Binding Acknowledgements

   A Binding Acknowledgement may be sent to indicate receipt of a
   Binding Update as follows:

      (snip)

   o  If the node rejects the Binding Update due to an expired nonce
      index, sequence number being out of window (Section 9.5.1), or
      insufficiency of resources (Section 9.5.2), a Binding
      Acknowledgement MUST be sent.  If the node accepts the Binding
      Update, the Binding Acknowledgement SHOULD NOT be sent.