CN-6-3-2 - Receiving packets with multicast address - Home Address field
Host
HA----------R2----------R1----------R0
| | | |
| | | |
|---- |---- |----MN |----CN(NUT)
| | | |
| | | |
Home Link Link2 Link1 Link0
(Foreign) (Foreign)
Link0 3ffe:501:ffff:100::/64 Link1 3ffe:501:ffff:101::/64 Foreign Link Link2 3ffe:501:ffff:102::/64 Foreign Link 2 Home Link 3ffe:501:ffff:104::/64 Home Link CN(NUT) 3ffe:501:ffff:100::X
Auto Configuration (InterfaceID)MN(in Link1) 3ffe:501:ffff:101::Y
Increased in each test (InterfaceID)MN care-of address MN(in Home Link) 3ffe:501:ffff:104::Y
Increased in each test (InterfaceID)MN home address R0(Link0) 3ffe:501:ffff:100::1 R1(Link1) 3ffe:501:ffff:101::1 R2(Link2) 3ffe:501:ffff:102::1 HA(Home Link) 3ffe:501:ffff:104::1
Reboot NUT (reboot.rmt)
MN R1 HA R0 CN(NUT)
| | | | |
| | | |------>| 1.RA
| | | | |
| | | |------>| 2.NS
| | | | |
| | | |<------| 3.NA
| | | | |
|-------------->|-------------->| 4.Echo Request
| | | | |
|<--------------|<--------------| 5.Echo Reply
| | | | |
|------------------------------>| 6.Echo Request(Home Address=Multicast address)
| | | | |
|<------------------------------| 7.BE(Status=1,Home Address=Multicast address) (*1)
| | | | |
1. Send Router Advertisement. 2. Send Neighbor Solicitation. 3. Receive Neighbor Advertisement. 4. Send ICMP Echo Request. 5. Receive ICMP Echo Reply. 6. Send ICMP Echo Request(Home Address=Multicast address). 7. Receive Binding Error(Status=1).
Packet Format 6. ICMP_Echo Request(Home Address option) 7. Binding Error
(*1) MN receives Binding Error. - The Destination Address is set to the Source Address of ICMP Echo Request (MN care-of address). - The Status field is set to 1. - The Home Address field is set to the value in the Home Address option in the ICMP Echo Request (Multicast address).
(draft-ietf-mobileip-ipv6-24.txt)
9.3.1 Receiving Packets with Home Address Option
Packets containing a Home Address option MUST be dropped if the given home address is not a unicast routable address.
(snip)
If the packet is dropped due the above tests, the correspondent node MUST send the Binding Error message as described in Section 9.3.3. The Status field in this message should be set to 1 (unknown binding for Home Address destination option).
9.3.3 Sending Binding Error Messages
The Home Address field in the Binding Error message MUST be copied from the Home Address field in the Home Address destination option of the offending packet, or set to the unspecified address if no such option appeared in the packet.