MN-2-1-4-2-002 - Receiving CoT a little late (wait 0.5 second)
Host
|
R CN0
| |
-----+-------+--------+---------------- LinkZ
|
R2 NUTY
| |
-----+-------+-----------------+------- LinkY
|
R1 NUTX
| |
-----+-------+-----------------+------- LinkX
|
HA0 Node0 NUT0
| | |
----------------------+---------------+---------+------- Link0
| Link0 |
3ffe:501:ffff:100::/64 |
home link |
| LinkX |
3ffe:501:ffff:102::/64 |
|
| LinkY |
3ffe:501:ffff:103::/64 |
|
| LinkZ |
3ffe:501:ffff:104::/64 |
|
| HA0(Link0) |
3ffe:501:ffff:100:200:ff:fe00:a0a0 |
|
| Node0(Link0) |
3ffe:501:ffff:100:200:ff:fe00:a3a3 |
|
| R1(LinkX) |
3ffe:501:ffff:102:200:ff:fe00:a4a4 |
|
| R2(LinkY) |
3ffe:501:ffff:103:200:ff:fe00:a6a6 |
|
| CN0(LinkZ) |
3ffe:501:ffff:104:200:ff:fe00:a8a8 |
|
1. Selection Option
- Route Optimization support: YES
2. Position of Mobile Node
HA0 NUT0 R1 R2 CN0
| | | | |
| ----> | | | | 1.Router Advertisement
| | | | |
| NUTX | | |
| | | | |
| | <---- | | | 2.Router Advertisement
| | | | |
| <---- | | | | 3.Neighbor Solicitations
| | | | | 4.(no reply:3 seconds)
| | | | |
| <---- | | | | 5.Binding Update
| ----> | | | | 6.Binding Acknowledgement
| | | | |
1. Send Router Advertisement. (HA0 -> HA0_allnode_multi)
2. Send Router Advertisement. (R1 -> R1_allnode_multi)
3. Receive Neighbor Solicitations. (NUT0 -> HA0)
4. (no reply)
# Wait during a maximum of 3 seconds(RFC2461).
5. Receive Binding Update to HA0. (NUTX -> HA0)
6. Send Binding Acknowledgement. (HA0 -> NUTX)
HA0 NUTX R1 R2 CN0
| | | | |
| ====> | <--------------------- | 1.ICMP Echo Request
| | | | |
| <==== | ---------------------> | 2.Home Test Init
| | ---------------------> | 3.Care-of Test Init
| | | | | 4.wait(0.5 sencond)
| | <--------------------- | 5.Care-of Test
| ====> | <--------------------- | 6.Home Test
| | | | |
| <==== | ---------------------> | 7.ICMP Echo Reply
| | ---------------------> | 8.Binding Update (*1)
| | ---------------------> | 9.ICMP Echo Reply
| | | | |
1. Send ICMP Echo Request. (out: HA0 -> NUTX, in: CN0 -> NUT0)
2. Receive Home Test Init. (out: NUTX -> HA0, in: NUT0 -> CN0)
3. Receive Care-of Test Init. (NUTX -> CN0)
4. wait(0.5 second)
5. Send Care-of Test. (CN0 -> NUTX)
6. Send Home Test. (out: HA0 -> NUTX, in: CN0 -> NUT0)
7. Receive ICMP Echo Reply or [9]. (out: NUTX -> HA0, in: NUT0 -> CN0)
8. Receive Binding Update to CN0. (NUTX -> CN0)
9. [7] or Receive ICMP Echo Reply. (NUTX -> CN0)
# Home Address destination option is included.
Packet Format is:
5.Care-of Test
8.Binding Update
(*1) PASS: CN0 receives the Binding Upadate.
(draft-ietf-mobileip-ipv6-24.txt)
11.6.2 Receiving Test Messages
(snip)
If after receiving either the Home Test or the Care-of Test message
and performing the above actions, the Binding Update List entry has
both the home and the care-of keygen tokens, the return routability
procedure is complete. The mobile node SHOULD then proceed with
sending a Binding Update as described in Section 11.7.2.
11.8 Retransmissions and Rate Limiting
(snip)
When the mobile node sends a Mobile Prefix Solicitation, Home Test
Init, Care-of Test Init or Binding Update for which it expects a
response, the mobile node has to determine a value for the initial
retransmission timer:
(snip)
o Otherwise, the mobile node should use the specified value of
INITIAL_BINDACK_TIMEOUT for the initial retransmission timer.