MN-3-1-1-1-001 - Generate HoA using RFC2462
Host
|
R CN0
| |
-----+-------+--------+---------------- LinkZ
|
R2 NUTY
| |
-----+-------+-----------------+------- LinkY
|
R1 NUTX
| |
-----+-------+-----------------+------- LinkX
|
HA0 Node0 NUT0
| | |
----------------------+---------------+---------+------- Link0
| Link0 |
3ffe:501:ffff:100::/64 |
home link |
| LinkX |
3ffe:501:ffff:102::/64 |
|
| LinkY |
3ffe:501:ffff:103::/64 |
|
| LinkZ |
3ffe:501:ffff:104::/64 |
|
| HA0(Link0) |
3ffe:501:ffff:100:200:ff:fe00:a0a0 |
|
| Node0(Link0) |
3ffe:501:ffff:100:200:ff:fe00:a3a3 |
|
| R1(LinkX) |
3ffe:501:ffff:102:200:ff:fe00:a4a4 |
|
| R2(LinkY) |
3ffe:501:ffff:103:200:ff:fe00:a6a6 |
|
| CN0(LinkZ) |
3ffe:501:ffff:104:200:ff:fe00:a8a8 |
|
1. Selection Option
- home address create mode : RFC2462
2. Position of Mobile Node
- none.
HA0 NUT0 R1 R2 CN0
| | | | |
| ----> | | | | 1.Router Advertisement
| | | | |
| <---- | | | | 2.Neighbor Solicitation(DAD) (*1)
| | | | | 3.(no reply)
| | | | |
| ----> | | | | 4.ICMP Echo Request
| <---- | | | | 5.ICMP Echo Reply (*2)
| | | | |
1. Send Router Advertisement. (HA0 -> HA0_allnode_multi)
2. Receive Neighbor Solicitation(DAD). (NUT0(Unspecified) -> HA0_solinode_multi)
3. (no reply)
# Wait during 3 seconds.
4. Send ICMP Echo Request. (HA0 -> NUT0)
# Destination address is set to home address of mobile node.
5. Receive ICMP Echo Reply. (NUT0 -> HA0)
Packet Format is:
2.Neighbor Solicitation(DAD) Data is:
IPv6 header (source = unspecified address,
destination = solicited-node multicast)
ICMP Neighbor Solicitation
Type = 135
Code = 0
Checksum = (auto)
Reserved = 0
Target Address = link local address
5.ICMP Echo Reply Data is:
IPv6 header (source = global address(home address),
destination = global address(HA0))
ICMPv6 Echo Reply
(*1) PASS: HA0 receives Neighbor Solicitation(DAD).
Then, check whether this packet fills all of the following.
- The target address is a link local address.
(*2) PASS: HA0 receives ICMP Echo reply.
(draft-ietf-mobileip-ipv6-24.txt)