MN-4-2-2-2-011 - Receiving ICMP error (Code = 2) from registered CN
Host
|
R CN0
| |
-----+-------+--------+---------------- LinkZ
|
R2 NUTY
| |
-----+-------+-----------------+------- LinkY
|
R1 NUTX
| |
-----+-------+-----------------+------- LinkX
|
HA0 Node0 NUT0
| | |
----------------------+---------------+---------+------- Link0
| Link0 |
3ffe:501:ffff:100::/64 |
home link |
| LinkX |
3ffe:501:ffff:102::/64 |
|
| LinkY |
3ffe:501:ffff:103::/64 |
|
| LinkZ |
3ffe:501:ffff:104::/64 |
|
| HA0(Link0) |
3ffe:501:ffff:100:200:ff:fe00:a0a0 |
|
| Node0(Link0) |
3ffe:501:ffff:100:200:ff:fe00:a3a3 |
|
| R1(LinkX) |
3ffe:501:ffff:102:200:ff:fe00:a4a4 |
|
| R2(LinkY) |
3ffe:501:ffff:103:200:ff:fe00:a6a6 |
|
| CN0(LinkZ) |
3ffe:501:ffff:104:200:ff:fe00:a8a8 |
|
1. Selection Option
- Route Optimization support : YES
2. Position of Mobile Node
HA0 NUT0 R1 R2 CN0
| | | | |
| ----> | | | | 1.Router Advertisement
| | | | |
| NUTX | | |
| | | | |
| | <---- | | | 2.Router Advertisement
| | | | |
| <---- | | | | 3.Neighbor Solicitations
| | | | | 4.(no reply:3 seconds)
| | | | |
| <---- | | | | 5.Binding Update
| ----> | | | | 6.Binding Acknowledgement
| | | | |
1. Send Router Advertisement. (HA0 -> HA0_allnode_multi)
2. Send Router Advertisement. (R1 -> R1_allnode_multi)
3. Receive Neighbor Solicitations. (NUT0 -> HA0)
4. (no reply)
# Wait during a maximum of 3 seconds(RFC2461).
5. Receive Binding Update to HA0. (NUTX -> HA0)
6. Send Binding Acknowledgement. (HA0 -> NUTX)
HA0 NUTX R1 R2 CN0
| | | | |
| ====> | <--------------------- | 1.ICMP Echo Request
| | | | |
| <==== | ---------------------> | 2.Home Test Init
| | ---------------------> | 3.Care-of Test Init
| | <--------------------- | 4.Care-of Test
| ====> | <--------------------- | 5.Home Test
| | | | |
| <==== | ---------------------> | 6.ICMP Echo Reply
| | ---------------------> | 7.Binding Update
| | ---------------------> | 8.ICMP Echo Reply
| | | | |
| | <--------------------- | 9.ICMP Echo Request
| | ---------------------> | 10.ICMP Echo Reply
| | <--------------------- | 11.ICMP Error(Code=2)
| | | | |
| | <--------------------- | 12.ICMP Echo Request
| | ---------------------> | 13.ICMP Echo Reply (*1)
| | | | |
1. Send ICMP Echo Request. (out: HA0 -> NUTX, in: CN0 -> NUT0)
2. Receive Home Test Init. (out: NUTX -> HA0, in: NUT0 -> CN0)
3. Receive Care-of Test Init. (NUTX -> CN0)
4. Send Care-of Test. (CN0 -> NUTX)
5. Send Home Test. (out: HA0 -> NUTX, in: CN0 -> NUT0)
6. Receive ICMP Echo Reply or [8]. (out: NUTX -> HA0, in: NUT0 -> CN0)
7. Receive Binding Update to CN. (NUTX -> CN0)
8. [6] or Receive ICMP Echo Reply. (NUTX -> CN0)
# Home Address destination option is included.
9. Send ICMP Echo Request. (CN0 -> NUTX)
# Type2 routing header is included.
10. Receive ICMP Echo Reply. (NUTX -> CN0)
# Home Address destination option is included.
11. Send ICMP Parameter Problem, Code 2. (CN0 -> NUTX)
# The Type field is set to 4(Parameter Problem).
# The Code field is set to 2.
12. Send ICMP Echo Request. (CN0 -> NUTX)
# Type2 routing header is included.
13. Receive ICMP Echo Reply. (NUTX -> CN0)
# Home Address destination option is included.
(*1) PASS: CN0 receives the Echo Reply with type2 routing header.
(draft-ietf-mobileip-ipv6-24.txt)
11.3.5 Receiving ICMP Error Messages
(snip)
Correspondent nodes that have participated in the return routability
procedure MUST implement the ability to correctly process received
packets containing a Home Address destination option. Therefore,
correctly implemented correspondent nodes should always be able to
recognize Home Address options. If a mobile node receives an ICMP
Parameter Problem, Code 2, message from some node indicating that it
does not support the Home Address option, the mobile node SHOULD log
the error and then discard the ICMP message.