NAME

MN-2-2-1-1-002 - BU accepted (Status = 1)


TARGET

Host


TOPOLOGY

                    
                                  |
                                  R       CN0
                                  |        |
                     -----+-------+--------+---------------- LinkZ
                          |
                          R2                      NUTY
                          |                         |
                     -----+-------+-----------------+------- LinkY
                                  |
                                  R1              NUTX
                                  |                 |
                     -----+-------+-----------------+------- LinkX
                          |
                         HA0             Node0    NUT0
                          |               |         |
    ----------------------+---------------+---------+------- Link0
                    
Link0 3ffe:501:ffff:100::/64 home link
LinkX 3ffe:501:ffff:102::/64  
LinkY 3ffe:501:ffff:103::/64  
LinkZ 3ffe:501:ffff:104::/64  
HA0(Link0) 3ffe:501:ffff:100:200:ff:fe00:a0a0  
Node0(Link0) 3ffe:501:ffff:100:200:ff:fe00:a3a3  
R1(LinkX) 3ffe:501:ffff:102:200:ff:fe00:a4a4  
R2(LinkY) 3ffe:501:ffff:103:200:ff:fe00:a6a6  
CN0(LinkZ) 3ffe:501:ffff:104:200:ff:fe00:a8a8  


INITIALIZATION

 1. Selection Option
    - none
 2. Position of Mobile Node
    - none


TEST PROCEDURE

                    
       HA0     NUT0     R1      R2      CN0
        |       |       |       |        |
        | ----> |       |       |        | 1.Router Advertisement
        |       |       |       |        |
        |      NUTX     |       |        |
        |       |       |       |        |
        |       | <---- |       |        | 2.Router Advertisement
        |       |       |       |        |
        | <---- |       |       |        | 3.Neighbor Solicitations
        |       |       |       |        | 4.(no reply:3 seconds)
        |       |       |       |        |
        | <---- |       |       |        | 5.Binding Update
        | ----> |       |       |        | 6.Binding Acknowledgement
        |       |       |       |        | 7.(wait)
        |       |       |       |        |
        | <---- |       |       |        | 8.Mobile Prefix Solicitation (*1)
        |       |       |       |        |
                    
        1. Send Router Advertisement. (HA0 -> HA0_allnode_multi)
        2. Send Router Advertisement. (R1 -> R1_allnode_multi)
        3. Receive Neighbor Solicitations. (NUT0 -> HA0)
        4. (no reply)
            # Wait during a maximum of 3 seconds(RFC2461).
        5. Receive Binding Update. (NUTX -> HA0)
        6. Send Binding Acknowledgement. (HA0 -> NUTX)
            # The Status field is set to 1(accepted but prefix discovery necessary).
        7. (wait)
            # Wait during a maximum of the remaining lifetime in the home registration.
        8. Receive Mobile Prefix Solicitation. (NUTX -> HA0)
                    
        Packet Format is:
          6. Binding Acknowledgement
          8. Mobile Prefix Solicitation
                    


JUDGEMENT

 (*1) PASS: HA0 receives Mobile Prefix Solicitation.


REFERENCE

                    
(draft-ietf-mobileip-ipv6-24.txt)
                    
11.7.3 Receiving Binding Acknowledgements
                    
(snip)
                    
   o  If the Status field indicates that the Binding Update was accepted
      (the Status field is less than 128), then the mobile node MUST
      update the corresponding entry in its Binding Update List to
      indicate that the Binding Update has been acknowledged; the mobile
      node MUST then stop retransmitting the Binding Update.  In
      addition, if the value specified in the Lifetime field in the
      Binding Acknowledgement is less than the Lifetime value sent in
      the Binding Update being acknowledged, then the mobile node MUST
      subtract the difference between these two Lifetime values from the
      remaining lifetime for the binding as maintained in the
      corresponding Binding Update List entry (with a minimum value for
      the Binding Update List entry lifetime of 0).  That is, if the
      Lifetime value sent in the Binding Update was L_update, the
      Lifetime value received in the Binding Acknowledgement was L_ack,
      and the current remaining lifetime of the Binding Update List
      entry is L_remain, then the new value for the remaining lifetime
      of the Binding Update List entry should be
                    
         max((L_remain - (L_update - L_ack)), 0)
                    
                    
      where max(X, Y) is the maximum of X and Y.  The effect of this
      step is to correctly manage the mobile node's view of the
      binding's remaining lifetime (as maintained in the corresponding
      Binding Update List entry) so that it correctly counts down from
      the Lifetime value given in the Binding Acknowledgement, but with
      the timer countdown beginning at the time that the Binding Update
      was sent.
                    
(snip)
                    
   o  Additionally, if the Status field value is 1 (Accepted but prefix
      discovery necessary), the mobile node SHOULD send a Mobile Prefix
      Solicitation message to update its information about the available
      prefixes.