[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

(racoon 58) Fw: bin/20704: racoon crashes when negotiating with WinXP

--- Begin Message ---


>Number:         20704
>Category:       bin
>Synopsis:       racoon crashes when negotiating with WinXP
>Confidential:   no
>Severity:       serious
>Priority:       high
>Responsible:    bin-bug-people
>State:          open
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Fri Mar 14 09:59:00 PST 2003
>Closed-Date:
>Last-Modified:
>Originator:     Michael van Elst
>Release:        NetBSD 1.6.1_RC1
>Organization:
	not me
>Environment:
	
	
System: NetBSD pepew 1.6.1_RC1 NetBSD 1.6.1_RC1 (PEPEW) #5: Sun Feb 9 22:58:16 MET 2003 src@pepew:/amd/fud-wave/d/0/src/sys/arch/i386/compile/PEPEW i386
Architecture: i386
Machine: i386
>Description:
racoon crashes _sometimes_ when negotiating an ESP tunnel with WinXP. The
same configuration works if the other side is NetBSD/racoon instead
of WinXP.

The coredump shows:

#0  0x804f07f in isakmp_send (iph1=0x0, sbuf=0x80bb990)
    at /d/0/src/usr.sbin/racoon/racoon/../../../crypto/dist/kame/racoon/isakmp.c:1409
1409            s = getsockmyaddr(iph1->local);
(gdb) where
#0  0x804f07f in isakmp_send (iph1=0x0, sbuf=0x80bb990)
    at /d/0/src/usr.sbin/racoon/racoon/../../../crypto/dist/kame/racoon/isakmp.c:1409
#1  0x804f329 in isakmp_ph2resend (iph2=0x80b4400)
    at /d/0/src/usr.sbin/racoon/racoon/../../../crypto/dist/kame/racoon/isakmp.c:1483
#2  0x804f26e in isakmp_ph2resend_stub (p=0x80b4400)
    at /d/0/src/usr.sbin/racoon/racoon/../../../crypto/dist/kame/racoon/isakmp.c:1466
#3  0x8084291 in schedular ()
    at /d/0/src/usr.sbin/racoon/racoon/../../../crypto/dist/kame/racoon/schedule.c:96
#4  0x804bb82 in session ()
    at /d/0/src/usr.sbin/racoon/racoon/../../../crypto/dist/kame/racoon/session.c:133
#5  0x804b7cf in main (ac=1, av=0xbfbfdb78)
    at /d/0/src/usr.sbin/racoon/racoon/../../../crypto/dist/kame/racoon/main.c:244
#6  0x804b160 in ___start ()
(gdb) whatis iph1
type = struct ph1handle *
(gdb) print iph1
$1 = (struct ph1handle *) 0x0
(gdb) up
#1  0x804f329 in isakmp_ph2resend (iph2=0x80b4400)
    at /d/0/src/usr.sbin/racoon/racoon/../../../crypto/dist/kame/racoon/isakmp.c:1483
1483            if (isakmp_send(iph2->ph1, iph2->sendbuf) < 0)
(gdb) print *iph2
$1 = {src = 0x80bb720, dst = 0x80bb4b0, src_id = 0x0, dst_id = 0x0, spid = 40, 
  status = 9, side = 0 '\000', sce = 0x80ba300, scr = 0x80ba480, 
  retry_counter = 4, sendbuf = 0x80bb990, msg1 = 0x0, retry_checkph1 = 0, 
  seq = 368, satype = 3 '\003', flags = 1 '\001', msgid = 1902323596, 
  sainfo = 0x80ba100, proposal = 0x80b1440, approval = 0x80b1660, 
  spidx_gen = 0x0, pfsgrp = 0x80b15c0, dhpriv = 0x80bb910, dhpub = 0x80bb7f0, 
  dhpub_p = 0x80bb9d0, dhgxy = 0x80bba30, id = 0x80bb7e0, id_p = 0x80bb930, 
  nonce = 0x80bb740, nonce_p = 0x80bb9e0, sa = 0x80bb730, sa_ret = 0x80bb9c0, 
  ivm = 0x80bb750, ph1 = 0x0, chain = {le_next = 0x0, le_prev = 0x80ae5c4}, 
  ph1bind = {le_next = 0x0, le_prev = 0x80b46b0}}


So, somewhere racoon loses or doesn't initialize a phase1 handle.

The isakmp.c file says:

/*      $KAME: isakmp.c,v 1.172 2002/01/02 09:06:53 jinmei Exp $        */

CVS reports the following version:

File: isakmp.c          Status: Up-to-date

   Working revision:    1.8.2.2
   Repository revision: 1.8.2.2 /cvsroot/src/crypto/dist/kame/racoon/isakmp.c,v
   Sticky Tag:          netbsd-1-6 (branch: 1.8.2)
   Sticky Date:         (none)
   Sticky Options:      (none)


I have configured the following policy in ipsec.conf:

spdflush;
# wavenet to volans
spdadd 10.27.5.5 0.0.0.0/0 any
        -P in  ipsec esp/tunnel/10.27.5.5-10.27.5.1/require;
spdadd 0.0.0.0/0 10.27.5.5 any
        -P out ipsec esp/tunnel/10.27.5.1-10.27.5.5/require;


racoon.conf is fairly standard:

----------------------- snip --------------------
# $KAME: racoon.conf.sample,v 1.20 2000/11/03 15:08:03 sakane Exp $

# "path" affects "include" directive.  "path" must be specified before any
# "include" directive with relative file path.
# you can overwrite "path" directive afterwards, however, doing so may add
# more confusion.
#path include "/etc/racoon" ;
#include "remote.conf" ;

# the file should contain key ID/key pairs, for pre-shared key authentication.
path pre_shared_key "/etc/racoon/psk.txt" ;

# racoon will look for certificate file in the directory,
# if the certificate/certificate request payload is received.
#path certificate "/usr/pkg/certs" ;

# "log" specifies logging level.  It is followed by either "info", "notify",
# "debug" or "debug2".
#log notify;

remote anonymous
{
        #exchange_mode main,aggressive,base;
        exchange_mode aggressive,main,base;

        my_identifier fqdn "fud.1st.de";
        #certificate_type x509 "foo@kame.net.cert" "foo@kame.net.priv" ;

        lifetime time 24 hour ; # sec,min,hour

        #initial_contact off ;
        #passive on ;

        # phase 1 proposal (for ISAKMP SA)
        proposal {
                encryption_algorithm 3des;
                hash_algorithm sha1;
                authentication_method pre_shared_key ;
                dh_group 2 ;
        }

        # the configuration makes racoon (as a responder) to obey the
        # initiator's lifetime and PFS group proposal.
        # this makes testing so much easier.
        #proposal_check obey;
}

# phase 2 proposal (for IPsec SA).
# actual phase 2 proposal will obey the following items:
# - kernel IPsec policy configuration (like "esp/transport//use)
# - permutation of the crypto/hash/compression algorithms presented below
sainfo anonymous
{
        pfs_group 2;
        lifetime time 12 hour ;
        encryption_algorithm 3des, cast128, blowfish, des, rijndael ;
        authentication_algorithm hmac_sha1, hmac_md5 ;
        compression_algorithm deflate ;
}
----------------------- snip --------------------


>How-To-Repeat:
Dunno. Happened 3 times in 2 days so far, always when WinXP tried
to set up the tunnel.

>Fix:
Dunno.
>Release-Note:
>Audit-Trail:
>Unformatted:
 	
 	


--- End Message ---