NAME

Delete_LT0_FOREIGN - Delete a Binding A=1 (Lifetime=0 & CoA!=HoA)

TARGET

Host/Router

SYNOPSIS

Delete_LT0_FOREIGN.seq [-tooloption ...] -pkt Delete_LT0_FOREIGN.def

-tooloption: v6eval tool option

TOPOLOGY

                                MN'
                                |
                --------+-------+------- LinkY
                        |
                        R1      MN
                        |       |
        --------+-------+-------+------- LinkX
                |
       NUT      R0
        |       |
--------+-------+----------------------- Link0

Link0	global	3ffe:501:ffff:100::/64
LinkX	global	3ffe:501:ffff:102::/64	home link
LinkY	global	3ffe:501:ffff:103::/64	foreign link
R0(Link0)	global	3ffe:501:ffff:100::a0a0
	link-local	fe80::200:ff:fe00:a0a0
	ether	00:00:00:00:a0:a0
MN	global	3ffe:501:ffff:102:200:ff:fe00:7	home address
MN'	global	3ffe:501:ffff:103:200:ff:fe00:7	care-of address

INITIALIZATION

NUT      MN      MN'
 |       |       |
 | <------------ | Echo Request
 | ------------> | Echo Reply
 |       |       |
 | <---- |       | HoTI
 | <------------ | CoTI
 | ----> |       | HoT
 | ------------> | CoT
 |       |       |
 | <------------ | BU
 | --X   |       | no response
 |       |       |
 | <------------ | Echo Request w/ HaO
 | ------------> | Echo Reply w/ RH
 |       |       |

 1. Send Echo Request
 2. Wait Echo Reply
 3. Receive Echo Reply
 4. Send HoTI & CoTI
 5. Wait HoT & CoT
 6. Receive HoT & CoT
 7. Send BU
 8. No response
 9. Send Echo Request w/ HaO
10. Wait Echo Reply w/ RH
11. Receive Echo Reply w/ RH

TEST PROCEDURE

NUT      MN      MN'
 |       |       |
 | <---- |       | HoTI
 | <------------ | CoTI
 | ----> |       | HoT (*1)
 | ------------> | CoT (*2)
 |       |       |
 | <------------ | BU
 | ------------> | BA (*3)
 |       |       |
 | <------------ | Echo Request w/ HaO
 | ------------> | BE (*4)
 |       |       |

1. Send HoTI & CoTI
2. Wait HoT & CoT
3. Receive HoT & CoT (*1) (*2)
4. Send BU
5. Wait BA
6. Receive BA (*3)
7. Send Echo Request w/ HaO
8. Wait BE
9. Receive BE (*4)

JUDGEMENT

(*1) PASS: MN receives HoT
(*2) PASS: MN' receives CoT
(*3) PASS: MN' receives BA
(*4) PASS: MN' receives BE
     WARN: no response
     FAIL: Recv unexpect packets

REFERENCE

<draft-ietf-mobileip-ipv6-19.txt>
9.5.4. Sending Binding Acknowledgements
----------------------------------------------------------------
   If the Source Address is the home address of the mobile node, i.e.,
   the Binding Update did not contain a Home Address destination option,
   then the Binding Acknowledgement MUST be sent to that address,
   and the routing header MUST NOT be used.  Otherwise, the Binding
   Acknowledgement MUST be sent using a type 2 routing header which
   contains the mobile node's home address.
----------------------------------------------------------------

SEE ALSO

MIP6.pm
MIP6.def